Trimming Different Vegetation And On Different Terrain

There are different ways to use your Line Trimmer or Brush Cutter and depending on the type of job, some are better than others. Using the right trimming method for the vegetation and terrain you have, will not only help you achieve better results, it will also make your work a lot easier. 

In this article, we describe the basic trimming technique, but also the best way to cut:

• Long or tough grass and weed
• Large, flat areas
• On a slope
• Around obstacles

THE BASIC TRIMMING TECHNIQUE

Let’s start with the basics.

The cutting attachment rotates anti-clockwise. When you trim from right to left, the trimmings will fall on the area that has been cut. With the trimmings out of your way, the rest of the job will be a lot easier.

CUTTING LONG OR TOUGH GRASS AND WEED

When you are working with long grass or tough vegetation, we recommend 2 cuts.

First, cut the top of the grass from right to left. Then cut again from left to right to remove the remaining grass. The trimmings will discard to the left.

TRIMMING LARGE, FLAT AREAS

If you have a large area to mow, use the square method. Divide the area into squares, and then work along the outsides toward the centre.

TRIMMING ON A SLOPE

The strip method is a good way to work on a slope. Start by cutting a strip parallel to the slope. Then return along the strip and mow the next strip above and repeat.

The trimmings will always fall into the area that has been cut.

TRIMMING AROUND OBSTACLES

When you are trimming right up to trees or bushes use nylon line or polycut blades, a metal blade will do too much damage, if you accidently hit the trunk. Another way to protect the trunk is by placing the deflector or the spacer bracket up against it as a guide, while you move around.

When several plants are growing close together, it's best to trim around them before mowing the lawn.

TRIMMING WITH THE RIGHT TOOL

In addition to using the right method, it is equally important to maintain a good working position, this will ensure your safety and comfort during operation. Click here to learn how.

Depending on the size of your property and the density of the vegetation you are dealing with, you should also make sure you have the right tool for the job, as well as the right cutting attachment.